Joe's Boats

Home



Work in progress?


I was able to rip the plys apart and vacuum bag them back together. here you see the lights inside the boat where I am putting the patch back in place.


Removing big patches of delaminated glass.


Cleaned up fire damage. ground down past the damage. This is quite thin at this point because the damage on the inside was extensive and has been removed.


As you can see the epoxy has been burnt away. I have pressure washed away the loose epoxy and glass and 99% of the carbon. It looks like a build in progress here. Its just clean destruction.


I have evicted the trees and scraped out all of the homesteading foam. This was actually a lot of work. Putty knife and manual wire brush. Fuel tank #1 location.


More tree evictions and scraping Nice and clean. Fuel tank #1 location.


As you can see the epoxy has been burnt away. I have pressure washed away most of the loose epoxy and glass and 90% of the carbon. It almost looks like a build in progress here. Its just more clean destruction.


More destruction.


Delamination evicted.


More scraping and cleaning in progress. Fuel tank #1 location.


post delaminated gelcote removal.


Vaccuumed fixes. Fairing in progress.


In progress cleaning Fuel tank #2 location.


Dear delam, I thought we had an agreement. :( This is delaminated so bad I believe that every layer is separate. ugh.


While cleaning the inside. Pressure washer is on the other side and the wet dry vac line is what you see in this side. Awesome vac with an evacuation pump!!